![background image](http://html1.mh-extra.com/html/adtran/qfo-c/qfo-c_installation-and-maintenance-manual_2854927015.webp)
61181300L1-5C
Section 61181300L1-5C, Issue 3
15
NOTE
Port 0 (all ports) “Out of Service” disables the
entire module. Port 0 must be “In Service” for
any Port 1 to 4 to be active.
Changing the DSX Equalization
1. From the Provisioning of All Ports screen, type “1”
and press Enter to select DSX Equalization. The DSX
Equalization Screen (
Figure 11
) will appear.
2. Type the number corresponding to the desired
equalization value and press Enter.
Changing the Loopback Timeout Value
1. From the Provisioning of All Ports screen
(Figure 10), type “2” and press Enter to select
Loopback Timeout. The Loopback Timeout Screen
(
Figure 12
) will appear.
2. Type the number corresponding to the desired
loopback timeout value and press Enter.
Figure 11. DSX Equalization Screen
Shelf: Slot: 10 Total Access System 07/15/99 10:43
Unacknowledged Alarms: MINOR
DSX Equalization: 0 to 133' ABAM
1. 0 to 133' ABAM
2. 134 to 266' ABAM
3. 267 to 399' ABAM
4. 400 to 533' ABAM
5. 534 to 655' ABAM
Selection:
‘?’ - System Help Screen
Figure 12. Loopback Timeout Screen
Shelf: Slot: 10 Total Access System 07/15/99 10:43
Unacknowledged Alarms: None
Loop Back Timeout: O min.
1. Disabled
2. 20 min.
3. 60 min.
4. 120 min.
Selection:
‘?’ - System Help Screen
Содержание QFO-C
Страница 30: ...30 Section 61181300L1 5C Issue 3 61181300L1 5C...