61200788L1-42A
Technical Support 1-888-4ADTRAN (1-888-423-8726)
19
1. Enter
interface serial 1/1
to access the configuration parameters for the serial interface.
2. Enter
config terminal
to enter the Global Configuration mode.
3. Enter
interface t1 0/1
to access the configuration parameters for the WAN 0/1 interface.
4. Enter
tdm-group 1 timeslots 1-12 speed 64
to create a TDM group for DS0 1 through 12 on
the T1 network (t1 0/1) at the speed of 64 kbps for each DS0.
5. Enter
exit
to return to Global Configuration mode.
6. Enter
cross-connect 1 t1 0/1 1 ser 1/1
to connect DS0 1 through 12 of the T1 network to the
serial 1/1 (V.35) interface.
1. Enter
interface t1 0/1
to access the configuration parameters for the WAN 0/1 interface.
2. Enter
tdm-group 1 timeslots 1-12 speed 64
to create a TDM group for DS0s 1 through 12
on the T1 network (t1 0/1) at the speed of 64 kbps for each DS0.
3. Enter
exit
to return to Global Configuration mode.
4. Enter
interface t1 1/1
to access the configuration parameters for the T1 interface (t1 1/1).
5. Enter
tdm group 2 timeslots 1-12 speed 64
to create a TDM group for DS0s 1 through 12
on the Expansion Slot T1 interface at a speed of 64 kbps for each DS0.
6. Enter
cross-connect 1 t1 0/1 1 t1 1/1 2 rbs
to connect DS0s 1 through 12 of the T1 network
to the Expansion Slot T1 interface (
rbs
is optional and is used when doing robbed-bit
signaling with voice applications).
1. Verify that the prompt of your unit displays
IAD#
.
2. Enter
copy running-config startup-config
to save the current configuration to memory.
3. Enter
exit
to close the configuration session.
Create a T1 to Serial Cross-Connect
For this example we will map DS0s from a T1 WAN interface to a serial port. The
NetVanta 950 IAD T1/V.35 Expansion Module (1200798L1) must be installed for this
application to work. The following steps assume the Global Configuration mode is currently
active. Verify that the prompt of your unit displays
(config)#
.
Create a T1 to T1 Cross-Connect
For this example we will map DS0s from a T1 WAN interface to another T1 WAN interface.
The NetVanta 950 IAD T1/V.35 Expansion Module (1200798L1) must be installed for this
application to work.
Save the Configuration
