18
Technical Support 1-888-4ADTRAN (1-888-423-8726)
61200788L1-42A
1. Enter
interface t1 0/1
to access the configuration parameters for the WAN 0/1 interface.
2. Enter
tdm-group 1 timeslots 1
to create a TDM group for DS0 1 on the T1 network
t1 0/1
.
3. Enter
exit
to return to Global Configuration mode.
4. Enter
cross-connect 1 t1 0/1 1.1 fxs 2/1
to connect DS0 1 of the T1 network to the FXS port
(fxs 2/1).
1. Enter
interface t1 0/1
to access the configuration parameters for the WAN 0/1 interface.
2. Enter
tdm-group 1 timeslots 2
to create a TDM group for DS0 2 on the T1 network
t1 0/1
.
3. Enter
exit
to return to Global Configuration mode.
4. Enter
cross-connect 2 t1 0/1 1.2 fxo 4/1
to connect DS0 2 of the T1 network to the FXO
port (4/1).
For this example we will map a single DS0 from a T1 WAN interface to an FXS port. The
NetVanta 950 IAD Octal FXS access module (1200791L1) must be installed for this application
to work. The following steps assume the Global Configuration mode is currently active. Verify
that the prompt of your unit displays
(config)#
.
Create a T1 to FXO Cross-Connect
For this example we will map a single DS0 from a T1 WAN interface to an FXO port. The
NetVanta 950 IAD Octal FXO access module (1200792L1) must be installed for this
application to work. The following steps assume the Global Configuration mode is currently
active. Verify that the prompt of your unit displays
(config)#
.
