NetVanta 6310/6330 Series Hardware Installation Guide
Physical Description
61700100G1-34F
Copyright © 2013 ADTRAN, Inc.
19
10/100Base-T Ethernet Interfaces
The Ethernet ports (
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors. See
Table A-2 on page 43
for the
Ethernet interface pinouts. The Ethernet ports provide the following:
• 10Base-T or 100Base-T with a single connector
• Auto negotiation
• CSMA/CD
• IEEE 802.3 compatibility
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE), which provides for local management and
configuration (via a DB-9 female connector). See
Table A-1 on page 43
for the
CONSOLE
interface
pinouts.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
Supplying Power to
the Unit on page 40
for connection details.
NetVanta 6310/6330 Series Front Panel LEDs
Table 1
describes the front panel LEDs.
Connection directly to an external modem requires a cross-over cable.
Table 1. NetVanta 6310/6330 Series Front Panel LEDs
LED
Color
Indication
STATUS
Off
Unit is not receiving power.
Green (flashing)
On power up, the
STATUS
LED flashes rapidly for five
seconds, during which time the user may escape to boot
mode from the
CONSOLE
port.
Green (solid)
Power is on and unit is functioning normally.
Red (solid)
Power is on, but the self-test failed.
PRI
(6310)
Off
Interface is administratively disabled.
Green (solid)
Interface is enabled and has a connection.
Amber (solid)
Interface is in test mode.
Red (solid)
An alarm condition is occurring on the interface.
FXO/FXS
(6330 Series)
Off
All ports are inactive or administratively disabled.
Green (solid)
At least one port is off-hook.
Green (flashing)
At least one port is ringing.
Amber (solid)
Port is in test mode.
Red (solid)
Fault condition is occurring on the interface.
