ADTRAN NetVanta 3140 Desktop, Руководство по установке оборудования

Страница: 30 / 38

Unit Installation NetVanta 3100 Series Hardware Installation Guide
30 Copyright © 2015 ADTRAN, Inc. 61700600L2-34C
Dual Wall Mounting a NetVanta 3140 (P/N 1700341F1)
Figure 15. NetVanta 3140 Dual Wallmount Installation
Instructions for Dual Wall Mounting NetVanta 3140
Step Action
1 Attach the mounting brackets (P/N 1700512F1) to the two chassis using the provided screws
(see
Figure 15 ).
2 Decide on a location for the NetVanta. NetVanta 3140 units can be dual wall mounted with the
front panel facing up, left, or right.
Figure 15 illustrates a dual wallmount configuration with the
front panel facing to the left. Keep in mind that the unit needs to be mounted at or above eye
level so that the LEDs of both units are viewable.
3 Prepare the mounting surface by attaching a board (typically plywood, 3/4-inch to 1-inch thick)
to a wall stud using #6 to #10 (2.5-inch or greater in length) wood screws.
Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide
sufficient long-term stability.
4 Have an assistant hold the units in position as you install two #6 to #10 wood screws (1 inch or
greater in length) through the unit’s brackets and into the mounted board.
5 Proceed to the steps given in Supplying Power to the Unit on page 34 .
Ensure that the proper mounting orientation is followed for both units being installed in
the dual wallmount configuration. Refer to the appropriate hardware installation guide for
installation instructions for each unit.