ADTRAN NetVanta 3140 Desktop, Руководство по установке оборудования

Страница: 28 / 38

Unit Installation NetVanta 3100 Series Hardware Installation Guide
28 Copyright © 2015 ADTRAN, Inc. 61700600L2-34C
Figure 13. Wall Mounting the NetVanta 3120 Series/3130 Series/3140 Desktop
Wall Mounting a Single NetVanta 3140 (P/N 1700341F1)
Instructions for Wall Mounting a Single NetVanta 3140
Step Action
1 Attach the mounting brackets (P/N 1200884G1) to the chassis using the provided screws (see
Figure 14 ).
2 Decide on a location for the NetVanta. NetVanta 3140 units can be dual wall mounted with the
front panel facing up, left, or right.
Figure 14 illustrates the unit mounted with the front panel
facing to the left. Keep in mind that the unit needs to be mounted at or above eye level so that
the LEDs are viewable.
3 Prepare the mounting surface by attaching a board (typically plywood, 3/4-inch to 1-inch thick)
to a wall stud using #6 to #10 (2.5-inch or greater in length) wood screws.
Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide
sufficient long-term stability.
4 Have an assistant hold the unit in position as you install two #6 to #10 wood screws (1 inch or
greater in length) through the unit’s brackets and into the mounted board.
5 Proceed to the steps given in Supplying Power to the Unit on page 34 .