ADTRAN NetVanta 3140 Desktop, Руководство по установке оборудования

Страница: 25 / 38

NetVanta 3100 Series Hardware Installation Guide Physical Descriptions
61700600L2-34C Copyright © 2015 ADTRAN, Inc. 25
Table 2. NetVanta 3140 Series Front Panel LEDs
STAT Off Unit is not receiving power.
Green (flashing) The unit is powering up. On power-up, the STAT LED flashes
rapidly for five seconds.
Green (solid) The power is on and self-test passed.
Red Power is on, but the self-test failed.
Amber (solid) The unit is in bootstrap mode.
USB
(Future Release)
Off Interface is shut down or not connected.
Green (solid) A supported device is connected.
Amber (flashing) There is activity on the link.
Red (solid) An alarm condition is occurring on the USB port, or there is a
failure.
LINK
(GIG 1 - GIG 3)
(1700340F1 only)
Off The port is administratively disabled or does not have link.
Green (solid) The port is enabled and the link is up.
ACT
(GIG 1 - GIG 3)
(1700340F1 only)
Off There is no activity on the link.
Green (flashing) There is activity on the link.
Port LEDs
(GIG 0/1 - GIG 0/3)
Off There is no activity on the link.
Green (solid) The port is enabled and the link is up.
Amber (flashing) There is activity on the link.
On the 1700340F1, the behavior of the LINK and ACT LEDs (labeled GIG 1 through
GIG 3) on the front of the unit corresponds to the behavior of the RJ-45 LEDs (labeled
GIG 0/1 through GIG 0/3) located on the rear of the unit.