Setting up the circuit
1.
Unplug the serial cable from the COM port of the PC and plug that end into the
Modem connection on the Netgear FWG114P. The serial cable should now be
connecting the Netgear FWG114P router with the ADTRAN Express 3000.
2.
Use the Ethernet cable provided with the Netgear FWG114P to connect one of the
local ports on the Netgear FWG114P to the Network card on your PC.
3.
Power on the Netgear FWG114P by plugging in the power cord and restart your
computer.
Network Diagram
Configuring the Netgear FWG114P
NOTE: The steps that follow may differ depending on the firmware version loaded on the
Netgear.
1.
Open your web browser (Internet Explorer, Mozilla Firefox, etc.).
2.
In the address bar type
http://192.168.0.1
(this is the built in web page for the
Netgear router). If you are unable to connect, restart the Netgear FWG114P by
cycling the power.
3.
You will be asked for a username and password, and by default they are “admin”
and “password”, respectively.
