61222004L2-5A
Section 61222004L2-5, Issue 1
11
The Detailed Status selection from the System Status
Menu, illustrated in
Figure 12
, displays the T1 and
HDSL2 status for each receiver point. The Legend
selection provides a description of the messages that
are used on the Status Screens. There is also a Zero
Registers selection, which applies only to error
indicators displayed on the Status Screen.
Figure 13
illustrates the Loopback and Test
Commands Screen, which provides the user with the
ability to evoke or terminate all available HDSL2
loopbacks. Each HDSL2 circuit component can be
looped toward the network or customer from this
screen. It also provides a self-test option to perform a
self-diagnostic of the H2TU-C and H2TU-R. A Loop
down ALL units command is available in lieu of the
Self-Test option when any loopback is active.
Figure 12. Detailed Status Screen
CIRCUIT ID: 01/01/00 00:05:18
Press ESC to return to previous menu
Detailed HDSL2 and T1 Status
HDSL2 RECEIVER DATA
H2TU-C H2TU-R
-------- --------
MARGIN(CUR/MIN/MAX): 15/00/16 14/00/15
ATTEN(CUR/MAX): 02/02 03/03
ES 15MIN: 000 000
SES 15MIN: 000 000
UAS 15MIN: 026 016
T1 RECEIVER DATA
DSX-1 DS1
------- -------
FRAMING: ESF ESF
LINE CODE: B8ZS B8ZS
ES-P/ES-L: 000/000 000/001 1. Zero Registers
SES-P/SES-L: 000/000 000/000 2. Restart Min/Max
UAS-P/UAS-L: 000/315 304/000
ALARMS: RED BLUE Selection:
Figure 13. Loopback and Test Commands Screen
CIRCUIT ID: 01/01/00 00:05:52
Press ESC to return to previous menu
Loopback and Test Commands
______ ______
|H2TUC | |H2TUR |
<------| | | |------>
| | | |
| | | |
| | | |
NET | |<--------->| | CUST
| | | |
| | | |
| | | |
------>| | | |<------
|______| |______|
DSX-1 DS1
1. Run Self Tests
2. H2TU-C Loopup Network
3. H2TU-C Loopup Customer
4. H2TU-R Loopup Network
3. H2TU-R Loopup Customer
Selection:
Содержание 3192 H2TU-C
Страница 20: ...20 Section 61222004L2 5 Issue 1 61222004L2 5A...
