ADTRAN 12804108L1A, Системное руководство

Страница: 48 / 60

Section 5 User Interface Guide TRACER 4108/4208 System Manual
48 © 2003 ADTRAN, Inc. 612804208L1-1B
>TRACER S
YSTEM
O
PTIONS
> S
ITE
N
AME
Provides a user-defined alphanumeric description (up to 25 characters) for the TRACER 4108/4208
system.
>TRACER S
YSTEM
O
PTIONS
> RF B
ANDPLAN
Sets the bandplan for the TRACER 4108/4208. Each channel is divided into three bandplans (1, 2, or 3).
Both local and remote TRACER 4108/4208 must be configured with the same bandplan (1, 2, or 3) but
different channel plans (Plan A or Plan B). For example, the transmitter at one end of the link will transmit
in bandplan 1 of channel A (the lower portion of the spectrum) and receive in bandplan 1 of channel B (the
upper portion). Consequently, the receiver at the other end should receive in bandplan 1 of channel A (the
lower portion) and transmit in bandplan 1 of channel B (the upper portion). (Refer to Figures 5 and 6 for
the 2.4 GHz and 5.8 GHz bandwidth division, respectively.) The TRACER 4108/4208 comes factory
programmed with RF bandplan set to Band 1.
Figure 5. 2.4 GHz Bandwidth Division (TRACER 4108)
Figure 6. 5.8 GHz Bandwidth Division (TRACER 4208)
Channel A
2416 2441.75 2422 2428 2400 MHz 2483.5 MHz
Bandplan 3
Bandplan 2
Bandplan 1
Channel B
2456 2462 2468
Bandplan 3
Bandplan 2
Bandplan 1
Channel A
5742 5725 5787 5850 5747 5753 MHz MHz
Bandplan 3 Bandplan 2 Bandplan 1
Channel B
5822 5827 5833
Bandplan 3 Bandplan 2 Bandplan 1