ADTRAN 12804108L1A, Системное руководство

Страница: 36 / 60

Section 4 Network Turnup Procedure TRACER 4108/4208 System Manual
36 © 2003 ADTRAN, Inc. 612804208L1-1B
1. INTRODUCTION
This section discusses the installation process of the TRACER 4108/4208 system.
2. TOOLS REQUIRED
The tools required for the installation of the TRACER 4108/4208 are:
• VT100 terminal or PC with terminal emulation software
• RS-232 (DB-25 male for TRACER 4108/4208) cable for connecting to terminal
3. UNPACK AND INSPECT THE SYSTEM
Each TRACER 4108/4208 is shipped in its own cardboard shipping carton. Open each carton carefully and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier, then contact ADTRAN Customer Service (see
Customer
Service, Product Support Information, and Training information in the front of this manual).
Contents of ADTRAN Shipment
Your ADTRAN shipment includes the following items:
• TRACER 4108/4208 Unit
• TRACER 4108/4208 Documentation CD
• Eight T1 Crossover (RJ-48 to RJ-48) Cables
• Eight T1 Straight Through (RJ-48 to RJ-48) Cables
Customer Provides
The following items are necessary for the installation of the TRACER 4108/4208 system and are not
provided by ADTRAN:
• 21 to 60 VDC power source (or AC adapter available from ADTRAN P/N 1280650L1), either polarity
referenced to ground
• Antenna and mounting hardware
• Antenna feedline cable
• Lightning arrestors
• Weatherproofing kits for antenna installation
Changes or modifications not expressly approved by ADTRAN could void the user’s
authority to operate the equipment.
To prevent electrical shock, do not install equipment in a wet location or during a lightning
storm.