ADTRAN 1202060L2-1, Руководство пользователя

Страница: 52 / 86

Chapter 5. Configuration Menu
5-8 TSU LT User Manual 61202060L2-1
TEL NUM
This is the telephone number which is dialed to obtain alarm
traps. The string can be up to 20 characters in length and is
terminated with a semicolon
(;) as the last character. A colon
(:) character is used to represent a pause in the dial string.
For example, for number 9:5551212; dial 9, pause
momentarily and then dial 5551212. This pause could be
necessary to access an outside line, such as a PBX.
When editing a specific character, the arrows are used to
scroll from 0 to 9, then colon
(:) and semicolon (;) . The new
telephone number is entered into the TSU LT only upon
pressing
Enter after typing the semicolon.
Choices: 20 digits (0-9, :, and ;)
Port
The menu item PORT is used to select and then to configure
the parameters associated with the V.35.
RATE 56/64
This sets the base rate of the interface. The actual data rate
depends on the number of DS0s assigned to the Nx port. The
DTE data rate vs. the number of DS0s appears in the
appendix
DTE Data Rate Chart.
Choices: 56K, 64K
CHANNELS
This sets the unit to use
ALTERNATE
or
CONTIGUOUS
channels
in the T1 data stream. If more than 12 channels are used, then
CONTIGUOUS
must be used. If not, then
ALTERNATE
channels
may be used to meet pulse density requirements (only
necessary for Nx 64 without B8ZS). If other than a private
The typed digits are accepted only after pressing
Enter
.