background image

The "Program", below, refers to any such program or work, and a "work based on the 
Program" means either the Program or any derivative work under copyright law: that is to 
say, a work containing the Program or a portion of it, either verbatim or with modifications 
and/or translated into another language. (Hereinafter, translation is included without 
limitation in the term "modification".) Each licensee is addressed as "you". Activities other 
than copying, distribution and modification are not covered by this License; they are outside 
its scope. The act of running the Program is not restricted, and the output from the Program 
is covered only if its contents constitute a work based on the Program (independent of 
having been made by running the Program). Whether that is true depends on what the 
Program does. 
1. You may copy and distribute verbatim copies of the Program's source code as you receive 
it, in any medium, provided that you conspicuously and appropriately publish on each copy 
an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that 
refer to this License and to the absence of any warranty; and give any other recipients of 
the Program a copy of this License along with the Program. You may charge a fee for the 
physical act of transferring a copy, and you may at your option offer warranty protection in 
exchange for a fee. 
2. You may modify your copy or copies of the Program or any portion of it, thus forming a 
work based on the Program, and copy and distribute such modifications or work under the 
terms of Section 1 above, provided that you also meet all of these conditions: 
a) You must cause the modified files to carry prominent notices stating that you changed 
the files and the date of any change. 
b) You must cause any work that you distribute or publish, that in whole or in part contains 
or is derived from the Program or any part thereof, to be licensed as a whole at no charge 
to all third parties under the terms of this License. 
c) If the modified program normally reads commands interactively when run, you must 
cause it, when started running for such interactive use in the most ordinary way, to print or 
display an announcement including an appropriate copyright notice and a notice that there 
is no warranty (or else, saying that you provide a warranty) and that users may redistribute 
the program under these conditions, and telling the user how to view a copy of this License. 
(Exception: if the Program itself is interactive but does not normally print such an 
announcement, your work based on the Program is not required to print an announcement.) 
 These requirements apply to the modified work as a whole. If identifiable sections of that 
work are not derived from the Program, and can be reasonably considered independent and 
separate works in themselves, then this License, and its terms, do not apply to those 
sections when you distribute them as separate works. But when you distribute the same 
sections as part of a whole which is a work based on the Program, the distribution of the 
whole must be on the terms of this License, whose permissions for other licensees extend to 
the entire whole, and thus to each and every part regardless of who wrote it. 
Thus, it is not the intent of this section to claim rights or contest your rights to work written 
entirely by you; rather, the intent is to exercise the right to control the distribution of 
derivative or collective works based on the Program. In addition, mere aggregation of 
another work not based on the Program with the Program (or with a work based on the 
Program) on a volume of a storage or distribution medium does not bring the other work 
under the scope of this License. 
3. You may copy and distribute the Program (or a work based on it, under Section 2) in 
object code or executable form under the terms of Sections 1 and 2 above provided that 
you also do one of the following: 

Содержание EN-20


















































Отзывы: