TOS
Type of Service; selects the type
of multicast that will forward the
packet.
Normal
Minimize Cost
Maximize
Reliability
Maximize
Throughput
Minimize
Delay
*.ECMD0 TOS #
TTL
Time to live is a numeric value
from 1 to 255 that specifies the
number of iterations or
transmissions the packet can
undergo before it is discarded.
The default value is 7.
1 - 255
*.ECMD0 TTL #
Multicast
Connector
Sets the physical connector (on
the rear of the unit) to use for
multicast transmit purposes on
the indicated encode channel.
Ethernet
!GigE
*.ECMD0 MCN #
FEC Mode
Forward Error Correction; selects
on/off. When selected, sends two
FEC RTP streams in addition to a
source RTP stream enabling a
receiver to reconstruct missing
packets in the source stream.
The RTP Control (above) must be
set to
'on'
to enable FEC.
On
Off
Available if
RTP selected
'on'
*.ECMD0 FEP #
FEC L
affects the maximum burstpacket
loss that can be recovered
4-20
*.ECMD0 FEP #
FEC D
defines latency involved in
burstrecovery
4-20
*.ECMD0 FEP #
Service Select
Select both services or single
service transport stream
MPTS
SPTS1
SPTS2
*.ECMD0 MST #
Note: Four IP destinations are available on the product. The ‘#’ denoted in the IP Tx
Commands above are relevant to the four destinations indexed 0 - 3.
Содержание EN-20
Страница 1: ...EN 20 Dual Channel Capable HD SD MultiCODEC SDI Encoder w optional QAM Modulator USER GUIDE 2 03 09 ...
Страница 35: ......
Страница 42: ...Appendix B QAM Channels and Frequencies ...