Edje-2000
Real Time MPEG 2 Streaming Encoder
Version 1.3
Adtec Digital, Inc. USA
Page 36 of 36
The Connections Status Bar will change as show below.
1. Default state, not connected. The same prompt is displayed
when a connection error occurs.
2. While attempting to connect.
3. Once connected.
Connecting to the Edje-2000 Via Ethernet
The Edje-2000 ships with the following factor Ethernet configuration.
Variable
Setting
IP address
192.168.10.48
IP Mask Sub Net Mask
255.255.255.0
Gateway IP
0.0.0.0 Defaulted off.
User Name
ADTEC
Password
NONE
It is unlikely that the local network will be in the 192.168.10.xxx address
range. Therefore a serial connection will be required to configure the
Edje-2000 for the local network. A serial connection must be made then
the Ethernet Variables can be modified in the edje GUI.
IP Configuration Tab