Edje-2000
Real Time MPEG 2 Streaming Encoder
Version 1.3
Adtec Digital, Inc. USA
Page 18 of 18
SDI
(Option)
The SDI (D1) input requires a 75-Ohm source
with 1-volt P-P video input to the BNC
connector. It supports uncompressed SMPTE
259 M digital video and embedded AES-EBU
digital audio (4 channels)
Note: Video Input can be adjusted while encoding.
MPEG Type
MPEG 2
MPEG 2 ISO/IEC 13818
MP@ML
Max Horizontal Resolution 720 Lines
Max Vertical Resolution 480 Lines NTSC
Max Vertical Resolution 576 Lines in PAL
MPEG 1
MPEG 1 ISO/IEC 11172
MP@SL
(Currently disabled)
Max Horizontal Resolution 352 Lines
Max Vertical Resolution 240 Lines in NTSC
Max Vertical Resolution 288 Lines in NTSC
Data Rate Format (bits/Kilobits/Megabits)
bits
Bits per second. i.e. 3,000,000
Kilobits
Thousands of bits per second. i.e. 3000 Kbits is
equal to 3,000,000 bits per second
Megabits
Millions of bits per second. i.e. 3 Mbs is equal
to 300 Kbits
Note: The Video Data Rate can be adjusted while encoding when
using Program Streams over IP. Caution should be taken when
making large bit rate changes when using Transport Streams in
DVB-ASI platforms.
Bit Rate
Pull down menu for selecting pre configured video elementary stream
data rate (see Data Rate Format)
Bit Rate (Manual)
Free formatted data rate entry. Use to get very specific video elementary
stream data rate (see Data Rate Format)
Horizontal Resolution (HIS)
Horizontal pixel resolution of the image the edje-2000 encodes. Provides
a pixel sampling circuit that provides macro-block (16 lines) scaling
before feeding the uncompressed digital video to the IBM eNV encoder.
Range is Full D1, 720 to 196 pixels in 16 pixel (line) increments.
Note: Video Mode (NTSC or PAL) has no effect on the Horizontal
Resolution. Encoder must be stopped to change.
