Ð 30 Ð
TROUBLE CONDITIONS (Continued)
Words or letters in parentheses ( ) are those that are displayed on English Display
Touchpads.
m
Other Trouble
Displays
*
Any ÒbeepingÓ that
accompanies a
trouble display can be
stopped by depress-
ing any key on the
touchpad or by
entering an OFF
sequence (code +
OFF)
**
Ê
Not all systems use
wireless sensors.
1.
COMM. FAILURE
Indicates that a failure has occurred in the telephone com-
(or
FC
)
munication portion of your system.
CALL FOR SERVICE IMMEDIATELY.
2.
SYSTEM
LO BAT
Indicates that a low system battery condition exists. Display
(or
BAT
with no zone No.)
is accompanied by "beeping"* at the Touchpad. If this
condition persists for more than one day (with AC present),
CALL FOR SERVICE.
3.
LO BAT +
zone descriptor
Indicates that there is a low battery condition in the wireless
(or
BAT
with zone No.)
transmitter**
number displayed. Accompanied by a single
"beep"* (once every 40 seconds) at the Touchpad.
Either replace the battery yourself, or CALL FOR SERVICE.
If the battery is not replaced within 30 days, a
C H E C K
display may occur.
4.
Rcvr Jam
Wireless part of the system is experiencing RF interference
(or
CHECK 90
)
which may impede reception from wireless sensors.**
5.
MODEM COMM
(or
CC
)
Indicates that the control is on-line with the Customer Care
Center's remote computer. The control will not operate
while on-line. Wait a few minutes. Display should disappear.
6.
BELL FAILURE
Indicates that the wiring connection to the external sounder
(or
CHECK 70
)
is at fault (open or shorted). Accompanied by ÒbeepingÓ at
the touchpad. CALL FOR SERVICE IMMEDIATELY.
