Ð 26 Ð
SECURITY CODES (Continued)
To Add a User or
Change a User's
Code
Changing your
Master Code
Follow this procedure:
Enter your existing
Master code + [8] + [0][2]
+ new Master code + new
Master code again.
Important:
Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how
to use any system function they do not need to know, such as bypassing protection zones for example.
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
CODE
1.
ÊÊÊ ÊÊÊ ÊÊÊ ÊÊÊ + ÊÊÊ
8 Ê
Ê
Enter master code, then press CODE key.
(Master Code)
Example:
Ê
7
Ê
Ê
2
Ê
Ê
9
Ê
Ê
6
Ê
then press the CODE key.
2.
ÊÊÊ ÊÊÊ
Enter user number.
Enter the 2-digit User Number
(User Number)
(03-16) for the user you are adding or changing.
3.
ÊÊÊ ÊÊÊ ÊÊÊ ÊÊÊ
Enter user's code.
(User's Code)
Enter the new 4-digit security code for that user.
Ê
CODE
To Delete a User
1.
ÊÊÊ ÊÊÊ ÊÊÊ ÊÊÊ + ÊÊÊ
8 Ê
Ê
Enter master code, then press CODE key.
(Master Code)
Example:
Ê
7
Ê
Ê
2
Ê
Ê
9
Ê
Ê
6
Ê
then press the CODE key.
2.
ÊÊÊ ÊÊÊ
Enter user number.
(User Number)
Enter the 2-digit User Number (03-16) for the user whose
code you are deleting.
3.
-----------
S t o p .
Wait (about 3 seconds) until the touchpad beeps once
before pressing any other key. The code is automatically
deleted.
