Industrial PCs OPC6012/6015
26
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
6.4
N
ETWORK CONNECTION
(RJ45)
If the drivers required for functioning are installed on the device, the control system may be
integrated in an Ethernet network supporting the 10/100/1000Mbit standard by using the
Ethernet 10/100/1000BaseT network connector. Specifications of this network topology
must be observed in this case. You can install the drivers required for functioning from the
enclosed service CD, should they not be installed on the device.
PIN-NUMBER
SIGNAL NAME
1
TX +
2
TX -
3
RX +
4
NC
5
NC
6
RX -
7
NC
8
NC
Pos : /Datent ec hni k/Sc hnitts tell en/ Funknetz wer kkart e/F unknetz wer kkart e f ür VMT Seri e @ 1 \ mod__6. doc @ @ 32600012463645135395856
Note:
The device has two separately integrated network controllers of the Realtek RTL
8111c Family PCIe Gigabit Ethernet type.
Note:
PXE booting is only possible by using the LAN1 port.
Pos : 32 /D atent ec hni k/Schnitts tell en/Funknetz wer kkar te/ Funknetz wer kkar t e f ür VMT 6000 Serie @ 2\ mod_1260517076470_6. doc @ 6872 @
Pos : 33 /D atent ec hni k/Schnitts tell en/Seriell e Schnitts tell e C OM RS232/Serielle Sc hnitts tell e C OM (RS232) f ür VMT 60xx @ 1 \ mod_1246373571514_6. doc @ 5876 @
