EOS Extraoral Suction System, Instructions For Use and Installation
3
3)Before use
①
Make sure the grounding connection is properly established.
②
Make sure the electric wires are complete and properly connected.
4)During use
①
Avoid continuous suction running of the equipment. The product is designed to be used on
a per patient basis.
②
Continuously monitor equipment and patient for any irregularities.
③
Discontinue use of the product immediately in case of any irregularities that may arise in
the system or patient during use.
④
Patients should not be allowed to operate or handle the product.
5
）
After use
①
Cut off the main power in the following order: press the start button, turn off the power
switch, and disconnect the power cord.
②
Disconnect from the receptacle to avoid the dragging the power cord.
6)Environment requirements
①
The system should not be exposed to water.
②
The system should be free from possible hazards caused by pressure, temperature, humidity,
ventilation, sunlight, dust, salt, Sulphur-containing air, etc.
③
Avoid tilting, or the bumping of the system when moving.
④
Never expose the system to chemicals or place the it near a chemical storage area.
⑤
Clean and disinfect the system after every dental procedure.
7)Should a problem occur, please contact an ADS authorized dealers technical support team.
Do not disassemble or attempt to repair.
8
）
Attempts at modifications are strictly forbidden.
9)In case of following situations, turn off the equipment and disengage the power cord from
the wall receptacle.
①
Before each filter replacement, equipment cleaning, maintaining, or repairing.
②
Should any irregularities arise, such as heat and noise.
③
When the system is not in use for a period of time.