ADS-tec OPC8008, Инструкция по эксплуатации

Страница: 43 / 61

OPC8000 series 43
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
programmes, we cannot ensure that the soft keyboard works properly
with all available software.
When deactivating the soft keyboard, the previously active state
(alphanumeric / numeric keys or function keys) will be stored and will
be displayed when re-activating the keyboard. This setting can be
configured.
Pos : 22 /D atent ec hni k/Bedienung/T ouch Scr een/T ouch Scr een für VMT 60xx @ 1\ mod_1246361069977_6.doc @ 5853 @
6.3 Touch screen
The control system is equipped with a touch screen monitor. The touch screen is internally
connected via the USB interface. The driver software necessary for use is already integrated
in the respective operating system.
Pos : 23 /D atent ec hni k/Bedienung/ St atus-Anzeig en/ SYS- LED/ SYS- LED für VMT 60xx- Serie @ 2\ mod_1260525540269_6.doc @ 6876 @
Note:
The corresponding driver can be downloaded
http://www.ads-tec.de/industrial-it/download/treiber.html in the device
series.
6.4 Status displays
SYS LED
Depending on the type of flashing different device states are displayed by the SYS LED.
The following signals are displayed:

LED off Device is switched off (POWER OFF)

LED green Device is ready for operation (POWER ON)

LED yellow flashing Adaption of Volume /

LED yellow Min-/Max value of brightness has been reached
Pos : 25 /D atent ec hni k/Schnitts tell en/Sc hnitts tell eneinst ellung/Sc hni ttst elleneins tell ung für VMT-Serie / PLC 500 @ 0\ mod_1158916296612_6. doc @ 517 @