Adp 40000 Series, Руководство по установке

Страница: 5 / 18

Description
Backup Battery Option Kit Installation Guide 1
Description
The backup battery is a 12 VDC lead-acid battery that provides enough power to keep the
Series 4000 timeclock functioning at full capacity for up to two hours, depending on
whether optional devices are connected to the timeclock. For example, if a linear imager or
bar code wand reader is connected to the timeclock, the amount of time that the backup
battery can provide power may be less than two hours.
The backup battery option kit includes the following:
!
Backup battery
!
Charger board
!
Cable to connect the charger board to the battery
!
Cable to connect the charger board to the Series 4000 timeclock’s main board
It takes 24 hours for the Series 4000 timeclock to charge the backup battery after you install
it. Also, if the battery ever becomes depleted (completely discharged) from use, allow 24
hours for the timeclock to recharge the battery.
When the Series 4000 timeclock is on AC power, the amber power LED (the bottom LED in
the upper right corner of the timeclock) lights steadily; when the timeclock is on backup
battery power, the amber power LED blinks.
Warning
The type of lead-acid battery used in the Series 4000 timeclock can generate hundreds of
amperes for short periods of time if its timeclock posts or cable leads are shorted together.
Use extreme caution when handling the battery to ensure that its cable leads do not come in
contact with each other and that its timeclock posts do not come in contact with metal.
Avertissement
Le terminal de la série 4000 utilise une pile au plomb capable de générer des centaines
d'ampères pendant de courtes durées si les bornes du timeclock et les plombs du câble sont
mis en court-circuit. Soyez très vigilant lors de la manipulation de la pile afin d'éviter que
les plombs du câble ne se touchent et que les bornes du timeclock ne rentrent en contact
avec du métal.