Adp 40000 Series, Руководство по установке

Страница: 12 / 18

Installing the Backup Battery Option
8 ADP, Inc.
Installing the Backup Battery Option
Use the following procedure to install the backup battery and its charger board.
Note
For purposes of clarity, the illustrations in this procedure do not show detail that is not
directly related to installing the backup battery. For example, an Ethernet cable is not
shown. The illustrations also show the timeclock mounted to cover an AC outlet. However,
this procedure applies to all power source scenarios.
1. If you are installing the Series 4000 timeclock and have mounted the base to the wall,
perform this step.
If you are adding or replacing the backup battery in your installed timeclock, go to
step 2.
Remove the wire transformer clip from the base so that you have room to install the
backup battery. Do this by squeezing both sides of the clip until you can lift it from the
base.