Adobe LiveCycle
Before You Install
Installing and Configuring LiveCycle Security Products for JBoss
Manual installation and deployment checklist 14
Do not use the turnkey configuration method if you plan to enable SSL. If you require SSL, perform a
manual configuration. (See
“Installing LiveCycle Products” on page 33
.)
Manual installation and deployment checklist
The following table includes the steps required for installing LiveCycle products using the manual method.
Your application server must be installed before you perform the installation.
Perform this type of installation if you are installing the product in a production environment.
Note:
If you are installing multiple products, ensure that they are all installed before running
Configuration Manager to configure and deploy them.
Task
Topic
Ensure that you have the required software installed
in the target environment.
“System requirements” on page 11
Run the installation program with the turnkey option
enabled for JBoss.
For LiveCycle Policy Server, the product, JBoss,
and MySQL are installed.
For LiveCycle Reader Extensions and
LiveCycle Document Security, the product and JBoss are
installed.
“Installing LiveCycle Products Using
the Turnkey Installation” on page 20
(LiveCycle Reader Extensions) Set up default users, roles,
and login files.
“Setting up users, roles, and login
files” on page 41
(LiveCycle Policy Server) Configure JAAS authentication.
“Configuring JAAS authentication”
on page 56
Access the LiveCycle Reader Extensions or
LiveCycle Policy Server web application.
“Post-deployment” on page 26
Check the log file.
“Viewing log information” on
page 62
Task
Topic
Ensure that you have the required software installed
in the target environment.
“System requirements” on page 11
Run the installation program.
“Installing LiveCycle Products” on
page 33
(LiveCycle Policy Server) Create the database and
configure the application server.
“Preparing your Environment” on
page 36
(LiveCycle Reader Extensions,
LiveCycle Document Security) Complete the application
server configuration.
“Preparing your Environment” on
page 36
