243
USING FLASH CS4 PROFESSIONAL
Filters and Blends
Blend mode examples
The following examples illustrate how different blend modes affect the appearance of an image. The resulting effect of
a blend mode might be considerably different, depending on the color of the underlying image and the type of blend
mode you apply.
Apply a blend mode
To apply blends to selected movie clips, use the Property inspector.
Note:
You cannot apply different blend modes to different graphic symbols because multiple graphic symbols are merged
as a single shape when you publish the SWF file.
1
Select the movie clip instance (on the Stage) to apply a blend mode to.
2
To adjust the color and transparency of the movie clip instance, use the Color pop-up menu in the Properties panel.
3
Select a blend mode for movie clips from the Blend pop-up menu in the Properties panel. The blend mode is applied
to the selected movie clip instance.
4
Verify that the blend mode you selected is appropriate to the effect you’re trying to achieve.
Experiment with both the color and transparency settings of the movie clip and the different blend modes to achieve
the desired effect.
See also
“
Change the color and transparency of an instance
” on page 153
Original image
Layer
Darken
Multiply
Lighten
Screen
Overlay
Hard Light
Add
Subtract
Difference
Invert
Updated 5 March 2009