ADLINK Technology NuPRO-860 Series, Руководство пользователя

Страница: 11 / 54

Introduction 3
PCI golden finger bus-B. Throughput of PCI bus interface is
132 MB/s; supports 44-bit addressing using DAC protocol
X
Integrated IDE controller supports dual Ultra ATA 33/66/100
IDE channels; secondary IDE also supports a DB-6760CF
daughter card interace to provide one CF Type I/II connec-
tor.
X
Integrated Serial ATA Host Controllers: Features two sets of
interface signals that may be independently enabled,
tri-stated or driven low. An independent DMA controller sup-
ports each interface.
X
One EHCI USB 2.0 Host Controller and two USB UHCI
Host Controllers provide support for 4 USB 2.0 ports (two
ports on the back panel, and two ports via onboard pin
header. Over-current detection, USB legacy devices, USB
devices boot feature supported on all USB ports.
X
ACPI Power Management Logic Support.
X
Enhanced DMA Controller, Interrupt Controller, and Timer
Functions.
X
System Management Bus (SMBus) Specification, v2.0 with
support for I
2
C devices.
X
Low Pin Count interface/Firmware Hub: The ProCB-860's
System BIOS flash, the SST 49LF004A (4Mbit capacity), is
compatible with the Intel® 82802 Firmware Hub device.
BIOS write-protect function can be enabled/disabled in the
BIOS option menu.
X
Watchdog Timer: A 2-stage Watchdog Timer (WDT) is
embedded on Hance Rapids and can be enabled/disabled
via BIOS settings. Supports a selectable prescaler –
approximately 1 MHz (1 us to 1 s) and approximately 1KHz
(1 ms to 10 min). When the counter reaches the first preset
value the WDT generates an IRQ, SMI, or SCI interrupt and
loads the second preset value. When the counter reaches
the second preset value it drives WDT_OUT# low and
resets the ProCB-860.
Other features of the ProCB-860 include:
X
The Intel® 82541GI single port Gigabit Ethernet Controller
supports one gigabit Ethernet (GbE) port which is connected