background image

This guide is designed for new Radxa Zero user. In this guide, you can learn about the 
basic of Radxa Zero as well as how to prepare the board for basic use. Radxa Zero 
comes in different configurations and hardware revisions. As such, please make sure 
you have a supported board before proceeding, as some information is only applicable 
to a specific configuration. You can find the model and the hardware revision number on 
the top side of the board, while the memory / eMMC size can be identified via part 
number on the chip. You can learn how to identify those parts in 

here

. 

What you need 

Required 

 

Radxa Zero main board 

 

Storage media: 

o

 

Built-in eMMC module, or 

o

 

A microSD card that is at least 8GB if your board doesn't have an 
eMMC module. You can confirm this by checking if there is a big 
chip soldered on the bottom side of the board. 
For desktop usage we recommended at least 16GB, preferably 
32GB. 

 

USB-C hub 

o

 

Radxa Zero comes with one USB 3.0 Type-C port, located on the 
top side and is close to the center of the board. This port can be 
expanded into multiple USB 3.0 Type-A ports as well as Ethernet. 
No HDMI or DisplayPort Alternate Mode was implemented on this 
port, so you won't get video output even if your USB-C hub has 
those connectors. 

 

USB Keyboard and Mouse 

o

 

Once a USB-C hub is connected, Radxa Zero can be controlled 
with a full sized keyboard and mouse. 

 

Monitor and HDMI Cable 

o

 

Radxa Zero is equipped with a micro HDMI connector. A micro 
HDMI (Type-D) to HDMI (Type-A) cable is required. HDMI capable 
monitor/TV is recommended. 

o

 

HDMI EDID display data is used to determine the best display 
resolution. On monitors and TVs that support 1080p (or 4K) this 
resolution will be selected. If 1080p is not supported the next 
available resolution reported by EDID will be used. This will work 
with MOST but not all monitor/TVs. 

Содержание Zero RS102-D4E32H










Отзывы: