ADLINK Technology NuPRO-860 Series, Руководство пользователя

Страница: 37 / 54

Getting Started 29
3.2 Memory Installation
The NuPRO-860 CPU Module supports 200-pin PC2100/PC2700
registered/unregistered ECC DDR SDRAM up to 2GB maximum.
Two memory sockets are located on the CPU Core Module (one
on each side). If the required memory modules are pre-installed
when the product is received, this section may be skipped.
At least one memory module will be installed in the upper DIMM
slot of the NuPRO-860 when shipped. You can upgrade the
amount of RAM by changing the existing memory module, or by
adding a second SDRAM module. It is necessary to disassemble
the NuPRO-860 ‘s EM-64 CPU Module assemby to install an
SDRAM module in either of the sockets, so we recommend that
users have the required SDRAM installed professionally by
ADLINK.
The following list of memory modules has been tested for compat-
ibility with the NuPRO-860. The table outlines the combinations of
memory modules that have been tested on the NuPRO-860.
M1 : Transcend 256 MB DDR266 SODIMM
M2 : ATP AT64L64U8BFB3S 512MB PC2700 SODIMM
M3 : UNIGEN 512 MB DDR333 SODIMM (UG064D6688LR-DH)
M4 : UNIGEN 256 MB DDR333 SODIMM (UG032D7488KP-DH)
Installing the First Memory Module
Remove the heatsink as described in Section 3.1 CPU Installa-
tion above. Insert the module into the upper DIMM slot at a 30
degree angle and push the module firmly but gently downwards
into the slot until the security latches on the sockets have locked
into place on each side of the module (refer to
Figure 3.3: First
DIMM Slot1 DIMM Slot2 Total Size
M1 M2 768MB
M1 M3 768MB
M1 M4 512MB
M2 M3 1024MB
M2 M4 768MB
M3 M4 768MB