ADLINK Technology NuDAQ cPCI-7249R Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 74

ADLINK Technology NuDAQ cPCI-7249R Скачать руководство пользователя страница 27

Installation

13

User’s Manual

CompactPCI Installation Procedures

1. Read through this manual, and set the jumpers accord-

ing to your application.

2. Turn off your computer and turn off all accessories con-

nected to computer.

3. Remove the slot cover from the CompactPCI.

4. Select a 32-bit CompactPCI slot on the back plane for

cPCI-7248 board. Select a 32-bit CompactPCI slot with
rear I/O extension for cPCI-7249R.

5. Before handling the boards, discharge any static buildup

on your body by touching the metal case of the com-
puter. Hold the edge and do not touch the components.

6. Position the board into the slot you selected.

7. Secure the card on the back plane by using the screw

removed from the slot.

8. Install the rear I/O transition board for cPCI-7249R.

2.5

Device Installation for Windows Systems

Once Windows 2000/XP/Vista has started, the Plug and Play func-
tion of Windows system will find the new cards. If this is the first
time you are installing these cards on your Windows system, you
will be informed to input the device information source. Please
refer to the “

Software Installation Guide

” for the steps of install-

ing the device.

«
...
25
26
27
28
29
...
»

Содержание NuDAQ cPCI-7249R











































































Отзывы:

Нет отзывов