ADLINK Technology nanoX-AL, Руководство пользователя

Страница: 14 / 97

6
Specifications
2.10. Debug
z 40-pin flat cable connector to be used with DB-40 debug module
Supports: BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs
z MIPI60 60-pin header for debug of SoC (build option)
2.11. Power Specifications
Power Modes
AT and ATX mode (AT mode startup controlled by SEMA Board Controller)
Standard Voltage Input
ATX: 12V ±5% / 5Vsb ±5% or AT = 12V ±5%
Wide Voltage Input
ATX: 4.75-20V, 5Vsb ±5%; AT: 4.75-20V
Power Management
ACPI 5.0 compliant, Smart Battery support
Power States
Supports C0, C1, C1E, C6L, C6, S0, S3, S4, S5, S5 ECO mode (Wake-on-USB S3/S4,
WoL S3/S4/S5)
ECO Mode
Supports deep S5 for 5Vsb power saving
2.12. Power Consumption
Please contact your ADLINK representative for the document “COM Express Module Power Consumption”.
2.13. Operating Temperatures
Standard Operating
Temperature
0°C to +60°C (wide voltage input)
Storage: -20°C to +70°C
Extreme Rugged Operating
Temperature (optional)
-40°C to +85°C (standard voltage input only, build option, Intel Atom® SKUs only)
Storage: -40°C to +85°C
2.14. Environmental
Humidity
Operating: 5-90% RH, non-condensing
Storage:
5-95% RH (and operating with conformal coating)
Shock and Vibration
IEC 60068-2-64 and IEC-60068-2-27
MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I,
Condition D
HALT
Thermal Stress, Vibration Stress, Thermal Shock and Combined Test
2.15. Specification Compliance
z PICMG COM.0: Rev 3.0 Type 10, Mini size 84 x 55 mm