ADLINK Technology nanoX-AL, Руководство пользователя

Страница: 53 / 97

nanoX-AL
BIOS Setup
45
7.2.3. Main > Board Information
Feature Options Description
Board Information Submenu
Board Information Info only
Serial Number Info only Display SEMA serial Number.
Manufacturing Date Info only Display SEMA manufacturing date.
Last Repair Date Info only Display SEMA last repair date.
MAC ID Info only Display SEMA MAC ID.
Runtime Statistics Info only
Total Runtime
Info only
The returned value specifies the total time in minutes
the system is running in S0 state.
Current Runtime
Info only
The returned value specifies the time in seconds the
system is running in S0 state.
This counter is cleared when the system is removed
from the external power supply.
Power Cycles
Info only
The returned value specifies the number of times the
external power supply has been shut down
Boot Cycles
Info only
The Boot counter is increased after a HW- or SW-
Reset or after a successful power-up.
Boot Reason
Info only
The boot reason is the event which causes the reboot
of the system.
7.2.4. Main >System Date/Time
Feature Options Description
System Date Info only
System Time Info only
7.2.5. Main >Access Level
Feature Options Description
Access Level Info only