ADLINK Technology nanoX-AL Скачать руководство пользователя страница 79

Страница: 79 / 97

nanoX-AL

BIOS Setup

7.7. Save

Exit

Feature

Options

Description

Save Changes and Exit

Exit system setup after saving the changes.

Discard Changes and Exit

Exit system setup without saving any changes.

Save Change and Reset

Reset the system after saving the changes.

Discard Changes and Reset

Reset system setup without saving any changes.

Save Options

Info only

Save Changes

Save Changes done so far to any of the setup options.

Discard Change

Discard Changes fone so far to any of the setup
options.

Restore Defaults

Restore/Load Default values for all the setup options.

Save as User Defaults

Save the changes done so far as User Defaults.

Restore User Defaults

Restore the User Defaults to all the setup options.

Boot Override

Info only

Содержание nanoX-AL


































































































Результаты поиска

Содержание nanoX-AL

Отзывы:

Похожие инструкции для nanoX-AL

Бренды по названию

Популярные бренды

ADLINK Technology nanoX-AL, Руководство пользователя

Результаты поиска

Содержание nanoX-AL

Отзывы:

Похожие инструкции для nanoX-AL

Бренды по названию

Популярные бренды