73
CSA-7400 QSG
Safety Instructions
For user safety, please read and follow all
instructions
,
WARNINGS
,
CAUTIONS,
and
NOTES
marked in this manual and on the associated equipment before handling/operating
the equipment.
1. Read these safety instructions carefully.
2. Keep this user’s manual for future reference.
3. Read the specifications section of this manual for detailed information on the operating
environment of this equipment.
4. The equipment can be operated at an ambient temperature of 40°C.
5. When installing/mounting or uninstalling/removing equipment; or when removal of the
chassis lid required for user servicing (Section 3.1-3.5):
•
Turn off power and unplug any power cords/cables, and
•
Reinstall the chassis lid before restoring power.
6. To avoid electrical shock and/or damage to equipment:
•
Keep equipment away from water or liquid sources;
•
Keep equipment away from high heat or high humidity;
•
Keep equipment properly ventilated (do not block or cover ventilation
openings);
•
Make sure to use recommended voltage and power source settings;
•
Always install and operate equipment near an easily accessible electrical socket-
outlet;
•
Secure the power cord (do not place any object on/over the power cord);
•
Only install/attach and operate equipment on stable surfaces and/or recommended
mountings;
•
If the equipment will not be used for long periods of time, turn off and unplug the
equipment from its power source.
7. Never attempt to fix the equipment. Equipment should only be serviced by qualified
personnel.
8. A Lithium-type battery may be provided for uninterrupted, backup or emergency power.
CAUTION! Risk of explosion if battery is replaced with one of an incorrect type.
Please dispose of used batteries appropriately.
9. Equipment must be serviced by authorized technicians when:
•
The power cord or plug is damaged;
•
Liquid has penetrated the equipment;
•
It has been exposed to high humidity/moisture;
•
It is not functioning or does not function according to the user’s manual;
•
It has been dropped and/or damaged; and/or,
•
It has an obvious sign of breakage.
10. Please pay strict attention to all warnings
and advisories appearing on the device, to
avoid injury or damage.
11. The equipment may have more than one power supply input. To reduce the risk of
electrical shock, trained personnel should disconnect all power supply inputs before
servicing.
CAUTION! Disconnect all power supply inputs before servicing.
12. It is recommended that equipment be installed only in a server room or computer room
where access is: