19
CSA-7400 QSG
3.3.2
Inserting and Removing the MXN-3610 Switch Sled
Insert the Switch sleds into the 2 slots in upper
2 layers.
a. Insert the Switch sled into one of the upper 2 slots and open the ejector handles as
shown.
b. Push the Switch sled into the slot by pressing on the front panel of the Switch until the
front panel is flush with the chassis.
Caution:
Do NOT press on the front panel of the IO card. Doing so may cause damage
to the Switch and IO card.
X
X
