Adler AD 2828, Руководство пользователя

Страница: 4 / 44

immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The device is designed only for cutting natural human hair.
24. The cutting blades are very sharp. Be careful during assembly, disassembly and
cleaning. Do not touch the blades moving parts during operation!
25. Do not wash the blades in water.
26. Change the attachments only when the unit is turned off.
27. Use only original accessories.
28. To remove hair from inside the machine, use only the included brush.
29. Do not use the device in the bath.
30. Do not use the device on people who are sleeping.
31. During operation, do not place the device on wet surfaces or clothes.
32. The device is not designed to work with external schedulers or separate remote control
system.
DESCRIPTION OF THE DEVICE
1. On/Off switch
2. Head
3. Comb attachment 4. Cutting length without comb attachment adjusting lever
5. Power cord
USING THE DEVICE
Before starting to fully develope electric cable. Put comb (3) on the head (2) or select the cutting length using lever (4). Start clipping leading razor with a
comb in the direction "against the grain". This should be done slowly and at constant speed.
CLEANING
Disconnect the device from power. Blades clean using the brush. After cleaning, between the blades should be no hair. Every few haircuts sweep the hair
from the middle of the head, by removing the 2 screws previously. Clean the housing with a dry or slightly damp cloth. Every few haircuts oil the cutting head,
dropping in 2-3 drops of machine oil in the space in the space between the fixed blade and movable blade.
TECHNICAL DATA
Power supply: 220-240V ~ 50 / 60Hz
Do not leave the unit on to the wall outlet or power supply unit unattended.
CHARGING THE BATTERY
Charge the battery before use. To begin charging plug the power cord into the trimmer's socket, and the charger into a 220-240 V 50/60 Hz mains power
outlet. The charging indicator will light up . The light will remain on until the device is unplugged from mains power. The first charge takes 12 hours;
subsequent ones should last
8 hours. A fully-charged battery lasts for approximately 40 minutes of continuous use. After charging, unplug the charger from
the socket. If the trimmer is not used for a long period of time, it should be charged at least once every 6 months. In order to maintain adequate battery
capacity. If the battery is flat, you can continue cutting using the charger. To do this plug the charger cable into the trimmer socket. After 2 minutes you can
continue cutting.
4
DEUTSCH
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should
be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment.
Do not dispose this appliance in
the common waste bin.
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund von
bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.