Adler AD 2113, Руководство пользователя

Страница: 4 / 72

3. Wind the hair strand around the curling iron wand, starting at the hair tips and moving closer to the head.
1. Start with separating a strand of hair.
CURLING FUNCTION
4. Choose desired temperature: 140°C, 160°C, 180°C, 200°C, by pressing power switch (6) for 2 seconds.
3. The LED control lights will start to blink.
31. The device can be supplied only with the voltage specified on the housing.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power adaptor
cable to the device, and then connect the power adaptor to the power socket.
20. Do not leave the unit on to the wall outlet or power supply unit unattended.
1. Prior to cleaning, unplug the device from the power source and wait until it is cool to the touch.
DEVICE DESCRIPTION
CLEANING AND MAINTENANCE
30. Do not use the device on people who are sleeping.
22. Keep the device out of the reach of children. Using the device by children must be
supervised by adults.
35. The device is not designed to work with external schedulers or separate remote control
system.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using sharp
objects.
25. Do not use a hair curling iron in the bath.
24. Do not wrap electric cable around the device.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
34.During the operation ceramic plates heat up to high temperatures. Do not touch hot parts
of the hair curling iron and do not allow contact with the skin of the head, because it may
cause burns
33. After use, turn off and unplug the unit. Wait until the device cools down before storing.
2. Open the clip (3) using the lever (4), place the strand of hair so that the hair ends protrude slightly beyond the clip. Close the clip.
2. Turn the unit on by pressing the on/off switch for 3 seconds. (6)
1. Connect the unit to the power. Place the device on the stand (5) in safe position.
28. Do not cover the hair curling iron, it might cause the accumulation of heat in its interior
and it may cause damage or fire.
5. After use, switch the iron off with the on/off switch (6) by pressing it for 3 seconds, then unplug it from the power source.
32. During operation, do not place the device on wet surfaces or clothes.
1. Cool tip 2. Ceramic wand with plastic bristles
3. Clip 4. Lever
5. Stand 6. On/off power switch
4. For heavy curl effect, keep the strand of hair wound around the curling iron wand for +/-30 seconds or for a shorter time for light curls or
crimped hair.
7. Control lights 8. Swivel power cord
29. Hairsprays contain flammable materials. Do not apply them while using the device.
3. Do not wind the power cable around the device.
CAUTION: Avoid touching the head skin with the curling iron – this may cause burns.
INSTRUCTIONS FOR USE
2. Clean the body of the device with moist cloth. Never immerse the device in water or other liquids.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified electrician
before using it again.
4