Adkins Beta Swift, Руководство оператора

Страница: 10 / 23

Page 6
2. Installation
2.1 Transport instructions
The machine comes to you in a box or shrink-wrapped. If you have to
transport the machine at any time it is recommended that you use a
similar box and packing methods. Please let the machine cool down
and lower the handle to the locked position.
2.2 Installing the machine
2.2.1 Remove all packaging from the heat press.
2.2.2 Check to ensure that no damage has been caused to the
machine during transit. The machine is light enough for
handling by one person
2.2.3
Place the machine on a sturdy horizontal surface that is within
easy reach of the operator and allow space for the handle to
move up to the loading position. Ensure that no items
vulnerable to heat radiation are too close to the machine and
that local lighting is adequate.
2.3 Electrical requirements
The Beta Swift Press should be connected to the mains supply,
(nominally 230VAC for the European Market or 110VAC for America)
by the mains cable provided and a suitable plug. A qualified person
should carry out this work.
The press is designed for 230-240 VAC
±
50/60 hertz and requires
exclusive use of a power outlet rated for at least 8 amps (Europe), OR
for 110 VAC 12 amps (America).
Ensure that the supply rating on the machine specification plate
corresponds with your local supply and that the correct plug is fitted.
MAINS LEAD
The wires in this mains lead are coloured in accordance with the
following code:
Green and Yellow: EARTH
230 VAC Blue: NEUTRAL
Brown: LIVE