16
OPERATING INSTRUCTIONS
DMX Mode:
Operating through a DMX controller gives the user the freedom to create custom programs tailored
to his or her own individual needs. This function also allows you to use your fixtures as spot lights.
The WiFly EXR HEX5 IP has 5 DMX modes: 6 Channel mode, 7 Channel mode, 8 Channel mode,
11 Channel mode, and a 12 Channel mode. See the DMX Traits section of this manual for detailed
information.
1. To run your fixture in DMX mode, press the MODE button until “DMX MODE ADDR:XXX” is dis-
played, where “XXX” represents the current DMX address. Use the UP or DOWN buttons to scroll
through and find your desired DMX address.
2. After you have set your DMX address, press the SET UP button so that “CHAN:XX” is displayed,
where “XX” represents the currently selected DMX Channel mode. Use the UP or DOWN buttons
to scroll through the DMX Channel modes.
3. After you have chosen your desired DMX Channel mode, connect your fixture to any standard
DMX controller via the XLR connections.
Battery Life:
This is used to check/display the battery life. Plug the fixture in and press the MODE button until
“BATT LEV XXX” is displayed, where “XXX” represents the remaining battery life. If “BATT LEV ----” is
displayed, it means either the battery is dead or the unit is running on AC power.
Battery Load:
This is used to turn the PCB On when the battery is being used.
1. Press the MODE button until “BATT LEV” is displayed.
2. Press the SET UP button until “BATT LEV LOAD:XX” is displayed, where “XX” represents either
“ON” or “OFF”.
3. Press the UP or DOWN button so that “ON” is displayed. If “ON” is displayed already, then this
means that the PCB is already active.
Default Running Mode:
This is a default running mode. When activated, all modes will return to their default settings.
1. Plug the fixture in and press the MODE button until “OPTION BLGT:XX” is displayed, where “XX”
represents either “on” or “oFF”.
2. Press the SET UP button until “SYSRESET” is displayed.
3. Press the UP and DOWN buttons simultaneously to reset to default settings.
ADJ RFC:
This function is used to activate and deactivate the ADJ RFC (Remote Control). When this function is
activated, the fixture can be controlled using the ADJ RFC. Please see the ADJ RFC Operation sec-
tion of this manual for information regarding controls and functions.
1. Plug the fixture in and press the MODE button until “OPTION” is displayed.
2. Press the SET UP button until “RFXX” is displayed, where “XX” represents either “ON” or “OFF”.
3. Press the UP or DOWN buttons to either activate the remote function (On) or deactivate it (Off).
