ADJ WiFLY EXR HEX5 IP, Руководство пользователя

Страница: 15 / 30

15
OPERATING INSTRUCTIONS
RGBWA+UV Dimmer Mode:
1. Plug the fixture in and press the MODE button until “MANUAL” is displayed, then press the SET
UP button to scroll through RGBWA & UV colors.
• “RED:XXX” - Red dimming mode. Press the UP and DOWN buttons to adjust intensity.
• “GREN:XXX” - Green dimming mode. Press the UP and DOWN buttons to adjust intensity.
• “BLUE:XXX” - Blue dimming mode. Press the UP and DOWN buttons to adjust intensity.
• “WHIE:XXX” - White dimming mode. Press the UP and DOWN buttons to adjust intensity.
• “AMBR:XXX”- Amber dimming mode. Press the UP and DOWN buttons to adjust intensity.
• “UV:XXX” - UV dimming mode. Press the UP and DOWN buttons to adjust intensity.
2. After you have adjusted the RGBWA & UV colors to create your desired color, you can then acti-
vate strobing by pressing the SET UP button to enter the strobe mode.
3. “STROB: XX” will be displayed, indicating that the unit is in strobe body. The Flash can be
adjusted from 00 (flash off) to 15 (fastest flash).
Color Change Mode:
1. Plug the fixture in and press the MODE button until “JUMP RUN SNAP:XX” is displaye, where
“XX” represents a number between 01-16.
2. Use the UP and DOWN buttons to find your desired color change mode.
3. Press the SET UP button and “SPEED:XX” will be displayed. Use the UP and DOWN buttons to
adjust the speed of the color change.
Color Fade Mode:
1. Plug the fixture in and press the MODE button until “FADE RUN FADE:XX” is displayed, where
“XX” represents a number between 01-16.
2. Use the UP and DOWN buttons to find your desired color fade mode.
3. Press the SET UP button and “SPEED:XX” will be displayed. Use the UP and DOWN buttons to
adjust the speed of the color fade.
Auto Run Mode:
In this mode the WiFly EXR QA5 IP will run an auto program.
1. Plug the fixture in and press the MODE button until “AUTO RUN FAD+SNAP” is displayed.
2. Press the SET UP button and “SPEED:XX” will be displayed. Use the UP and DOWN buttons to
adjust the speed of the Auto Run.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLR MACS COLOR:XX” is displayed, where
“XX” represents a number between 00-63.
2. Use the UP and DOWN buttons to scroll through the 63 colors and find you desired color. After
you have found your desired color, you can activate strobing by pressing the SET UP button to
enter strobe mode.
3. “STROB:XX” will be displayed, indicating that the device is now in strobe mode. The strobing can
be adjusted between “00” (flash off) to “15” (fastest flash).