background image

S A F E T Y  G U I D E L I N E S

To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. 

ADJ Products, LLC is not responsible for injury and/or damages resulting from the misuse of this fixture 

due to the disregard of the information printed in this manual. Only qualified and/or certified personnel 

should perform installation of this fixture and only the original rigging parts included with this fixture 

should be used for installation. Any modifications to the fixture and/or the included mounting hardware 

will void the original manufactures warranty and increase the risk of damage and/or personal injury.

PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPT 

ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURES 

WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS FIXTURE 

AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS 

MANUAL VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY 

WARRANTY CLAIMS AND/OR REPAIRS.

DO NOT PLUG FIXTURE INTO A DIMMER PACK!

NEVER OPEN THIS FIXTURE WHILE IN USE!

UNPLUG POWER BEFORE SERVICING FIXTURE!

NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT!

Maximum ambient temperature is Ta: 40°C. DO NOT operate it where the temperature 

is higher than this. Unit surface temperature may reach up to 75°C. DO NOT touch 

the housing bare-hand during its operation. Turn off the power and allow about 15 

minutes for the unit to cool down before replacing or serving.

KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!

IF THE FIXTURE IS EXPOSED TO ENVIRONMENTAL TEMPERATURE CHANGES SUCH 

AS RELOCATION FROM AN OUTDOOR COLD TO AN INDOOR WARM ENVIRONMENT, 

DO NOT POWER THE FIXTURE ON IMMEDIATELY. INTERNAL CONDENSATION AS 

A RESULT OF ENVIRONMENTAL TEMPERATURE CHANGE CAN CAUSE INTERNAL 

FIXTURE DAMAGE. LEAVE THE FIXTURE POWERED OFF UNTIL IT HAS REACHED 

ROOM TEMPERATURE BEFORE POWERING ON.

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE! RETINA INJURY RISK - MAY 

INDUCE BLINDNESS! SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!

THIS IS A RISK GROUP 3 (HIGH RISK) PRODUCT ACCORDING TO EN 62471 AND IEC/

TR 62778. THE LUMINAIRE SHOULD BE POSITIONED 63METERS OR MORE FROM 

THE OUTPUT OF THE FIXTURE TO REDUCE OR ELIMINATE EXPOSURE.

6

Содержание Vizi BSW 300





































Отзывы: