background image

S A F E T Y  G U I D E L I N E S

POTENTIAL INTERNAL FIXTURE DAMAGE FROM EXTERNAL SOURCES OF LIGHT BEAMS

External sources of light beams from direct sunlight, lighting moving head fixtures, and lasers, which 

are focused directly towards the exterior housing and/or penetrate the front lens opening of ADJ lighting 

fixtures,  can  cause  severe  internal  damage  including  burning  to  optics,  dichroic  color  filters,  glass 

and metal gobos, prisms, animation wheels, frost filters, iris, shutters, motors, belts, wiring, discharge 

lamps, and LEDs.

This issue is not specific only to ADJ lighting fixtures, it is a common issue with lighting fixtures from all 

manufacturers. Although there is no true way to fully prevent this issue from happening, the guidelines 

below can prevent any potential damage from occurring if followed. Contact ADJ Service for more details.

DO NOT EXPOSE THE FIXTURE AND/OR FRONT LENS OPENING TO LIGHT BEAMS FROM 

DIRECT SUNLIGHT, OTHER LIGHTING MOVING HEAD FIXTURES, AND LASERS WHILE 

UNPACKING, INSTALLATION, USE, AND EXTENDED IDLE TIMES OUTDOORS.

DO NOT FOCUS A LIGHT BEAM FROM ONE LIGHTING FIXTURE DIRECTLY TOWARDS ANOTHER.

8

Содержание Vizi BSW 300





































Отзывы: