American DJ
®
- www.americandj.com - Vizi Beam 5R™ Instruction Manual Page 36
American DJ
®
- www.americandj.com - Vizi Beam 5R™ Instruction Manual Page 35
3. Tap the UP button until “
SCXX
” is displayed. “XX” represents
the current scene number that is displayed. You can call up to
48 scenes. For example, if “
SC05
”, it means that “Run” will run
the first 5 scenes you saved in “Edit”
4. Press the ENTER button and either “
C-XX
”, “
TIME
”, or “
CEDT
”
will be displayed.
• When “
C-XX
” is selected you can edit the channels of each
scene.
• When “
TIME
” is selected you can edit the time of each scene.
• When “
CEDT
” is switched ON, you can edit the program using
a DMX controller.
5. Press ENTER when you are done to save and press MODE/
ESC to exit.
REC
-
With this function you can record the scenes auto-
matically for the external controller.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
REC
” is displayed.
4. The display shows “
RE.XX
”, “XX” stands for the scene
number in the internal memory of where your scenes from the
controller will be stored.
5. Press the UP or DOWN button to select your desired scene
number.
6. Press ENTER to confirm, and the fixture will record the
scenes from the external controller.
7. Press MODE/ESC to return to the main menu.
RUN
-
With this function you can run your pre-made pro-
Vizi Beam 5R™
System Menu
EDIT
- This menu item allows you to write a program into the
memory (EEPROM) via the control panel or via the external
controller.
Please see pages 38-39 for detailed instructions.
SEPR
(IP01-IP07)
-
With this function you can edit any of
the internal programs (IP01-IP07) or auto program.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
SEPR
” is displayed, press ENTER.
4. The display will show “IPXX”. “XX” represeting 01-07. Tap
the UP of DOWN buttons to find your desired program to edit.
Press ENTER to edit the chosen program.
5. Press ENTER to save and press MODE/ESC to exit.
STEP
-
With this function you can program the number of
steps in your individual Program.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
STEP
” is displayed, press ENTER.
4. The display shows “
S-01
”, this stands for the first step of
your program. You can call up to 48 scenes in “Run”. For exam-
ple, if “
S-05
” is displayed, it means that “Run” will run the first
5 scenes you saved in “Edit”.
5. Press ENTER to save and press MODE/ESC to exit.
SCXX
-
With this function you can choose the number of
scenes in your Program. “XX” represents the current scene
number that is displayed.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
Vizi Beam 5R™
System Menu
