Vizi Beam 5R™
System Menu
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
FINE
MENU -
FINE
-
Switch between 8bit (coarse) and 16bit (fine) pan &
tilt movement. This also switches the DMX Channel mode
between 10 channel (8 bit) and 12 channel (16 bit) DMX
mode.
1. Access the main menu.
3. Tap the UP button until “
FINE
” is displayed, press ENTER.
4. Press the UP or DOWN buttons to select either “
ON
” to acti-
vate this function, or “
OFF
” to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
DEGR
MENU -
DEGR
-
With this function you can switch the Pan degree.
1. Access the main menu.
2. Tap the UP button until “
DEGR
” is displayed, press ENTER.
3. Press the UP or DOWN buttons to select either “
360
” or
“
540
”.
4. Press ENTER to confirm your selection.
5. Press MODE/ESC to return to the main menu.
American DJ
®
- www.americandj.com - Vizi Beam 5R™ Instruction Manual Page 26
American DJ
®
- www.americandj.com - Vizi Beam 5R™ Instruction Manual Page 25
Vizi Beam 5R™
System Menu
5. Press MODE/ESC to return to the main menu.
CLMP
- With this function you can clear the running time of
the lamp. Note Very Important: Please clear the lamp time
every time you replace the lamp.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
CLMP
” is displayed.
4. Press ENTER to clear the lamp time, or press MODE/ESC to
return to the main menu.
RPAN
MAIN MENU -
RPAN
-
The movement of the Pan will be reversed.
1. Access the main menu.
2. Tap the UP button until “
RPAN
” is displayed, press ENTER.
3. The display will show “
ON/OFF
”.
4. Press the UP button to select “
ON
” to activate this function,
or “
OFF
” to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
RTLT
MAIN MENU -
RTLT
-
The movement of the Tilt will be reversed.
1. Access the main menu.
2. Tap the UP button until “
RTILT
” is displayed, press ENTER.
3. Press ENTER, the display will show “
ON/OFF
”.
4. Press the UP button to select “
ON
” to activate this function,
or “
OFF
” to deactivate this function.
