Vizi Beam 5R™
System Menu
3. Tap the UP button until “
AUTO
” is displayed, press ENTER.
4. Now you can choose between “
CLOSE
”, “
HOLD
” “
AUTO
”, or
“
AUDI
”. “
HOLD
” is the default setting.
5. Select the mode that you want the fixture to run in case of a
lost DMX signal and press ENTER.
LAMP
MAIN MENU -
OPEN
With this function you can switch the lamp on or off
via the control board.
1. Access the main menu.
2. Tap the UP button until “
LAMP
” is displayed, press ENTER.
3. The display will show “
ON/OFF
”. Press the UP button to
select “
ON
” to switch on the lamp, or “
OFF
” to switch off the
lamp.
4. Press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.
RESE
MAIN MENU -
ALL
With this function you can reset all the motors.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
ALL
” is displayed, press ENTER.
4. Press ENTER to reset.
5. Press MODE/ESC to return to the main menu.
SCAN
With this function you can reset the pan/tilt motors.
1. Access the main menu.
American DJ
®
- www.americandj.com - Vizi Beam 5R™ Instruction Manual Page 22
American DJ
®
- www.americandj.com - Vizi Beam 5R™ Instruction Manual Page 21
button and test the different channels.
4. Press MODE/ESC to exit.
PLAY
MAIN MENU -
RUN
Run the unit in an Auto mode as a “master” in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
RUN
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice by pressing ENTER, “
PASS
” will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a “master”, or
as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUDI
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice by pressing ENTER, “
PASS
” will flash
in the display and fixture will begin its function.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 17 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
Vizi Beam 5R™
System Menu
