ADJ Products, LLC www.adj.com - RGBW4C IR Page 11
RGBW4C IR Operation
Note: When the power is switched Off and then back On, the
controller will return to the last operating mode.
Sound Active Mode:
1. Press the SOUND ACTIVE button and the corresponding LED
above the button will light.
2. Use the SOUND SENSITIVITY knob located at the rear to adjust
the sound sensitivity level.
3. Use the faders (10, 11, & 12) to adjust the LED intensity & fade
time. The RED/SPEED fader (13) cannot be used in this mode.
Chase Mode:
1. Press the CHASE button and the corresponding LED above the
button will light.
2. Press 1 of the 9 COLOR buttons (14) located in the Color/Chases
region to activate a chase. Please see the chase chart on page 12.
3. Once your desired chase program has been selected, use the
faders (10, 11, 12, & 13) to adjust the LED intensity, fade time, and
chase speed.
Auto Mode:
1. Press the AUTO button and the corresponding LED above the but-
ton will light.
2. Use the faders (10, 11, 12, & 13) to adjust the LED intensity, fade
time, and chase speed.
Color Macros Mode:
1. Press the COLOR MACROS button and the corresponding LED
above the button will light.
2. Use the faders (10, 11, 12, & 13) to adjust the preferable static
color, LED intensity, and fade time.
RGB Fade Mode:
1. Press the RGB FADE button and the corresponding LED above the
button will light.
2. Use the faders (10, 11, 12, & 13) to adjust the LED intensity, fade
time, and chase speed.
Manual RGBW Color Mode:
1. Press the MANUAL RGBW button and the corresponding LED
above the button will light.
ADJ Products, LLC www.adj.com - RGBW4C IR Page 10
15. POWER SWITCH - Accepts a DC 9V~12V, 300mA minimum, power
supply.
16. DC INPUT - Accepts a DC 9V~12V, 300mA minimum, power supply.
17. DMX OUT - Used to send DMX signal to the compatable LED fixtures.
18. IR RECEIVER SENSOR INPUT - Input for the included IR receiver sen-
sor.
19. SOUND SENSITIVITY - Use this knob to adjust the sound sensitivity.
RGBW4C IR
Controls and Functions - Rear Panel
18
17
16
15
19
