ADJ RGBW4C IR Скачать руководство пользователя страница 2

• 9 Static Colors

• RGBW Faders To Create Desired Color

• 9 Chases

• Auto, Program, RGBW, Chase, and Sound Active Modes

• Adjustable Program and Fade Speed

• Adjustable Sound Sensitivity

• Strobing

• Blackout

• ADJ LED RC2 Compatible (Sold Separately)

RGBW4C IR                                                         Features

RGBW4C IR                                       Product Registration

The RGBW4C IR carries a 1 year (365 days) limited warranty. Please 

fill out the enclosed warranty card to validate your purchase and war-

ranty. You may also register your product online at www. americandj.

com. All returned service items whether under warranty or not, must 

be freight pre-paid and accompany a return authorization (R.A.) num-

ber. If the unit is under warranty you must provide a copy of your proof 

of purchase invoice. Please contact ADJ customer support for a R.A. 

number.

To  optimize  the  performance  of  this  product,  please  read  these 

operating instructions carefully to familiarize yourself with the basic 

operations  of  this  unit.  These  instructions  contain  important  safety 

information regarding the use and maintenance of this unit. Please 

keep this manual with the unit, for future reference.

RGBW4C IR  

                             General Instructions

ADJ Products, LLC www.adj.com - RGBW4C IR    Page 3

Unpacking:

 

Thank you for purchasing the RGBW4C IR by ADJ Prod-

ucts,  LLC.  Every  RGBW4C  IR  has  been  thoroughly  tested  and  has 

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all equipment necessary to operate the unit has 

arrived intact. In the event damage has been found or parts are miss-

ing, please contact our toll free customer support number for further 

instructions. Please do not return this unit to your dealer without con-

tacting customer support first. 
Introduction:

 

The RGBW4C IR is a 32-channel RGB, RGBW or RGBA 

LED controller. Up to 8 LED fixtures or fixture groups can indepen-

dently be controlled via four fixture buttons. The units control panel 

includes; 9 “Static Color/Chase” buttons, which contain pre-pro-

grammed colors and chase programs, 3 programmable color preset 

buttons, 4 multi function faders that control RGBW intensities, as well 

as program speed, fade time, and master dimmer. There are 8 but-

tons used to select the operation mode, including RGB Fade, Auto 

Run, Color Macro, Chase, Sound Active, Strobe, Manual RGBW and 

Blackout modes. The RGBW4C IR is one of the simplest and most ver-

satile LED controllers available today. It is ideal for D.J.’s, nightclubs, 

lounges, bars, and anyone that wants easy control of LED Par’s, Bar’s, 

Flood’s, or Panel’s.  
Customer Support:
 ADJ Products, LLC provides a toll free customer 

support line, to provide help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

RGBW4C IR  

                              General Information

ADJ Products, LLC www.adj.com - RGBW4C IR    Page 2

Содержание RGBW4C IR











Отзывы: