ADJ INNO POCKET ROLL, Руководство пользователя

Страница: 14 / 20

14
P R I M A R Y - S E C O N D A R Y S E T U P
This function will allow you to link up to 16 units together and operate without a controller. The units
will be sound activated. In a Primary-Secondary set up, one unit will act as the controlling unit, and
the others will react to the controlling unit’s programs. Any unit can act as a Primary or as a Second-
ary.
1. Using approved DMX data cables, daisy chain your units together via the XLR connectors on the
rear panel of each unit. Remember that the male XLR connector is the input and the female XLR
connector is the output. The first unit in the chain (primary) will use the female XLR connector
only, and the last unit in the chain will use the male XLR connector only. For longer cable runs we
suggest a terminator at the last fixture.
2. Set the primary unit to your desired operating mode.
3. On the secondary units tap the MENU button until “PISD” is displayed, then press ENTER.
Choose either “SEC1” or “SEC2” and press ENTER.
4. The secondary units will now follow the primary unit.
P O W E R C O R D D A I S Y C H A I N
This feature allows the user to connect the fixtures to one another using the IEC input and output
sockets.
The maximum quantity that can be connected in this manner is as follows:
• 19 fixtures maximum for 120V
• 35 fixtures maximum for 240V
After the maximum fixtures has been reached you will need to use a new power outlet to accommo-
date any additional fixtures.
Linked fixtures should all be of the same make and model type. DO NOT mix fixtures.