ADJ INNO POCKET ROLL, Руководство пользователя

Страница: 12 / 20

12
U C I R R E M O T E C O N T R O L
The UC IR infrared remote gives you control of various device functions, as described below. To con-
trol the device, you must aim the remote at the front of the fixture. Maximum effective range is 30 feet.
STAND BY - Press this button to blackout the fixture.
FULL ON - Hold this button down to fully light up the unit. The unit will return to its previous state when
the button is released.
FADE/GOBO - Press this button to enter Gobo mode. Use the 1-9 buttons to select your desired gobo.
Adjust the output intensity using the “” and “DIMMER -” buttons.
“” and “DIMMER -” - Use these buttons to adjust the output intensity, or to adjust the
strobe speed.
STROBE - Press and hold this button to activate the strobe effect.
COLOR - This button has no defined function for this device.
1-9 - In Gobo mode, Color mode, or Show mode, these buttons will allow you to select a particular
gobo, color, or show, respectively.
SOUND ON & OFF - These buttons activate and deactivate the sound active mode.
SHOW - This activates the show mode. Use buttons 1-9 to select your desired show.
NOTE: The unit can only be controlled when it has been set to Primary mode. The unit will NOT
respond to commands when it has been set to Secondary mode.