ADJ FOCUS FLEX L19 Скачать руководство пользователя | Manualshive

Страница: 22 / 44

background image

W I R E L E S S D M X

BEFORE SETTING THE WIRELESS CHANNEL ON ANY WIRELESS DMX FIXTURE,

MAKE SURE THE SOURCE WIRELESS DMX TRANSCEIVER DEVICE IS OFF.

With this feature you are able to control the unit with DMX without the use of XLR cables. Your DMX

controller must be connected to a ADJ Wireless DMX Transceiver to use this function. Effective

range is up to 2500 feet/760 meters (open line of sight).
1. Ensure the source Wireless DMX Transceiver device is powered OFF.

2. Power ON the fixture and using the control panel scroll to the PERSONALITY menu and press

ENTER. Use the UP and DOWN buttons to highlight the WIRELESS DMX SETTINGS submenu

and press ENTER.

3. Using the UP and DOWN buttons, highlight ENABLE WIRELESS DMX. Press the ENTER button

to toggle between On and Off. Press ENTER so that “On” is displayed.

4. Next highlight SET WIRELESS DMX CHANNEL and press ENTER. Use the UP and DOWN

buttons to find your desired Wireless DMX address and press ENTER to confirm.

NOTE: Erratic fixture movement may occur if other Wireless DMX products are in use in the

same area and are using the same Wireless DMX channel. When Wireless DMX is enabled, the

fixture may immediately start to respond to the DMX wireless signal from another wireless DMX

Transceiver. Make sure to know what wireless DMX channels are being used in the area where

the fixture is being used.

ADJ WIRELESS DMX TRANSCEIVER only has 0-14 wireless channels, NO CH 15.

5. Set your desired DMX address in the DMX ADDRESS submenu of the DMX SETTINGS main

system menu. Set your desired DMX channel mode in the DMX CHANNEL MODE submenu of

the DMX SETTINGS main system menu.

6. Repeat this process for all Wireless DMX compatible fixtures in the wireless DMX network,

making sure all fixtures are assigned the same wireless DMX channel.

7. After all fixtures in the wireless DMX network have been set to the same wireless DMX channel

and powered ON, power ON the source Wireless DMX Transceiver device.

8. Test all fixtures connected to the wireless DMX network to confirm proper functionality.

22

«
...
20
21
22
23
24
...
»

Содержание FOCUS FLEX L19













































Отзывы:

Нет отзывов

Похожие инструкции для FOCUS FLEX L19

Бренд: ABB Страницы: 36

Бренд: ABB Страницы: 40

Бренд: Sagola Страницы: 8

D-MAS HyperSat 2540

Бренд: DanMedical Страницы: 103

Бренд: Haki Страницы: 24

Бренд: Dakota Digital Страницы: 5

Бренд: Jaga Страницы: 32

Бренд: Rane Страницы: 6

Бренд: Rane Страницы: 27

Бренд: Ranger Products Страницы: 6

Бренд: Rane Страницы: 88

Бренд: Haag-Streit Страницы: 21

Бренд: Yamaha Страницы: 5

Heart Guardian AED

Бренд: Radian Страницы: 36

Бренд: Waves Страницы: 8

Бренд: Vibration Research Corporation Страницы: 333

Quadro A Legs 3P 120 Degree Workstation with...

Бренд: Jason.L Страницы: 10

Бренд: Safavieh Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды