ADJ FOCUS FLEX L19 Скачать руководство пользователя

Страница: 16 / 44

NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughout

the entire system, including DMX data splitters and wireless systems.

Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for

lighting, and allows the DMX systems of the ﬁxtures to be modiﬁed and monitored remotely. This

protocol is ideal for instances in which a unit is installed in a location that is not easily accessible.

With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled con-

troller to send out a signal to devices on the wire, as well as allowing the ﬁxture to respond (known

as a GET command). The controller can then use its SET command to modify settings that would

typically have to be changed or viewed directly via the unit’s display screen, including the DMX Ad-

dress, DMX Channel Mode, and Temperature Sensors.

FIXTURE RDM INFORMATION:

Device ID

Device Model ID

RDM Code Personality ID

0038 0000-FFFF

0038

0x1900

Basic 22 (1)

Standard 31 (2)

Extended 40 (3)

Extended 104 (4)

Standard CMY 25 (5)

Extended CMY 28 (6)

Please be aware that not all RDM devices support all RDM features, and therefore it is important

to check beforehand to ensure that the equipment that you are considering includes all of the fea-

tures that you require.

The following parameters are accessible in RDM on this device:

[0x0011] Proxied Device Count

[0x0032] Clear Status ID

[0x0603] Realtime Clock

[0x0200] Sensor Deﬁnition

[0x0401] Lamp Hours

[0x1010] Power State

[0x0201] Sensor Value

[0x0402] Lamp Strikes

[0x1031] Preset Playback

[0x0080] Device Model Description

[0x0403] Lamp State

[0x0122] Default Slot Value

[0x0081] Manufacturer Label

[0x0404] Lamp Mode

[0x00B0] Language

[0x0082] Device Label

[0x0405] Device Power Cycles

[0x00A0] Language Capabilities

[0x00E0] DMX Personality

[0x0600] Pan Invert

[0x00C2] Boot Software Version Label

[0x00E1] DMX Personality Description [0x0601] Tilt Invert

[0x00C1] Boot Software Version ID

[0x0400] Device Hours

[0x0602] Pan Tilt Swap

[0x0070] Product Detail ID List

[0x0015] Comms Status

[0x0500] Display Invert

[0x0030] Status Messages

[0x0031] Status ID Description

[0x0501] Display Level

R E M O T E D E V I C E M A N A G E M E N T ( R D M )

Содержание FOCUS FLEX L19













































Результаты поиска

Содержание FOCUS FLEX L19

Отзывы:

Похожие инструкции для FOCUS FLEX L19

Бренды по названию

Популярные бренды

ADJ FOCUS FLEX L19, Руководство пользователя

Результаты поиска

Содержание FOCUS FLEX L19

Отзывы:

Похожие инструкции для FOCUS FLEX L19

Бренды по названию

Популярные бренды